Innokin vape kits are incredibly popular, especially with new vapers seeking user-friendly vape pens and starter kits. Below you'll find the compatible replacement vape coils (atomiser heads) that you'll need for all the popular models including Innokin T18 coils, Innokin Slipstream coils, Innokin Prism S coils and Innokin T22 coils. Innokin replacement coils are must-have accessories to keep you vaping uninterrupted and they feature the latest technology.
The longevity of your coils will depend on how heavily you vape, the nature of your device and the e liquid that you have chosen. Most Innokin devices such as the Innokin T22E starter kit are low wattage models compatible with high resistance coils and high PG e liquids. This means that they will generally last longer than low resistance sub ohm coils for more powerful vaping hardware. However, devices like the Innokin Coolfire Z50 Zlide vape kit deliver outputs of up to 50W. They are compatible with sub ohm coils and high VG e liquids and so may not last quite as long.
Coils accumulate e liquid residue which builds up over time and clogs the atomiser heads. In addition, if the coil wicking becomes dry it can burn and end the life of the coil. The signs that you should replace your coil are as follows:
The more you vape, the higher the VG content of your e liquid and the lower the resistance of your coils, the more frequently they will need to be replaced. You can expect atomiser heads such as the Innokin Prism S coils (formerly T20S coils) to last from as little as a few days to as long as an entire month. Innokin Z coils (formerly Zenith coils) boasting a resistance of 0.8ohm are suitable for high VG e liquids and so will generally have shorter lifespans. Change your coil when the quality of the flavour and vapour you experience diminishes.
No! Innokin develop coils specifically for each vape kit or vape kit. However certain coils are compatible with more than one tank or kit. For instance, Innokin T18 coils are compatible with both the Endura T18 and the Endura T22 kits. Innokin T18E coils will also fit the Innokin T22E. It is important to choose the right coils for your device and you can find the information you need by reading our product descriptions.
While certain coils may be considered to perform a little better than others, your choice of coil will be restricted to those that are compatible with your device. Coils vary in their construction and resistance. For instance, Innokin coils may be single coils, dual coils, bottom vertical (BVC) coils or Plex3D coils. The nature of the coil will impact the intensity of flavour and the vapour production that you experience. It always worth trying the different coils that are compatible with your device to see which you prefer. As coil choice is a matter of personal taste, no one coil is definitively better than another.
Each Innokin tank or vape kit is compatible with specific coils. In some cases, two or more different coils are available for a particular device. For example, you may be able to choose between 0.8ohm coils and 1.5ohm coils. The difference between the coils is the resistance. The 0.8ohm coils would be suitable for vaping e liquids that are at least 60VG and will produce significant vapour whereas the 1.5ohm coils are suitable for vaping e liquids that are at least 50PG and will produce discreet vapour.
All coils should be primed before you vape with them. Coils feature cotton wicks that when not primed will burn when you fire them. Simply install your coil, fill your tank with e liquid and wait for the e liquid to be absorbed by the wicking material. This will typically take 5 - 15 minutes.
Vape coils are installed and removed in a variety of ways. However, Innokin coils usually feature a push-fit design. This means that you slot the coil into place and remove it by pulling it out. With most Innokin devices you remove the coil by disconnecting your tank from the battery or vape mod, unscrewing the base of the tank and then pulling on the coil.
You should always purchase your Innokin replacement vape coils from an official Innokin stockist such as Vapekit. This will ensure that the coils you purchase are genuine Innokin coils. Fake Innokin coils may not perform well, might not work at all or could be dangerous. Fakes are common with replacement coils for all Innokin vaping hardware including the Adept Zlide, Zenith Pro, T18E Pro and Innokin Sceptre. Fake Innokin Zenith coils are particularly common.
The e liquids you can vape will depend on which device you have chosen, and which coils you have installed. Low wattage devices such as the Innokin prism T18E and Innokin Jem Pen are compatible with high PG e liquids whereas the Innokin iSub with Plex 3d coils or the Innokin Slipstream tank would enable you to vape high VG e liquids. You will find devices in the Innokin range that are suitable for vaping your preferred e liquids from all the popular brands. The leading brands include include Double Drip, Doozy Vape Co, Riot Squad, Dinner Lady, Vampire Vape, Zeus Juice and Nasty Juice. Our multi-buy deals give you the special value you need to try a variety of flavours. You will benefit from free UK delivery when spend just £10 on e liquids, coils for Innokin tanks, the latest pen kits or anything in the Vapekit range.